The smoothness of paper is a very important printing suitability, which is an important factor to affect the overall ink transfer and clear graphics and text. The paper with high smoothness can maintain a relatively high and stable ink transfer rate when the ink thickness slightly changes, and can quickly form a uniform and smooth ink film on the paper, with good glossiness, rich color layers, bright and bright; on the other hand, the smoothness is low, because of rough surface, pores, ink penetration, more importantly, the glossiness of the ink film is poor, Small branches fall into concave and printing, the quality standard of paper printing is not clear, which will lead to printing, printing color deviation and so on, directly affect the printing effect, especially for the higher requirements of cigarette label printing, the paper printing production with high smoothness should be selected.
There are many reasons for double shadow, but the most direct reason is that the fine surface strokes are not smooth or even, or the printing pressure. In order to achieve the factors such as plate transfer is not smooth, it is possible to bring effect to the plate. The technical equipment is suitable for personnel, plate, cardboard, ink and auxiliary materials.
Here the pressure is divided into up pressure and down pressure, up pressure refers to the gap between anilox roll and printing wheel. Low pressure refers to the gap between printing wheel and printing wheel. Large pressure clearance is small, small pressure clearance is large. The effect of overpressure is different from that of overpressure. The appearance of double will carefully observe the printing effect. If double appears in the stroke of handwriting, it is due to too much pressure, and the pressure is properly reduced, that is, the gap between anilox roll and printing wheel is enlarged by some appropriate ones, which will be affected by the direction of feed. If double appears lower than the direction of feed, it is due to too much news. Reducing down pressure, that is, increasing the gap between printing wheels, the effect will be improved.
These are the relevant contents introduced by Jinan printing factory. If you want to know more, please visit the website: http://www.zhongguoyingyou.com返回列表